Tiller Gasoline Engine
video

Tiller Gasoline Engine

Power and Models: Common power ranges from 4.5HP to 7.5HP, with power output at 6.5HP/3600r/min. Some models also feature the 7.5HP 170F/P engine.
Displacement and Fuel Tank: Displacement varies by engine power, while fuel tank capacity typically ranges from 1.5 liters to 3.6 liters.
Send Inquiry
Product Introduction

The gasoline engine for tillers is a gasoline-powered engine used to drive tillers in performing tillage tasks.

Power and Models: Common power ranges from 4.5HP to 7.5HP, with power output at 6.5HP/3600r/min. Some models also feature the 7.5HP 170F/P engine.

Displacement and Fuel Tank: Displacement varies by engine power, while fuel tank capacity typically ranges from 1.5 liters to 3.6 liters.

Cooling and Starting: Generally employing air-cooling systems, eliminating the need for complex water-cooling equipment. Common starting methods include recoil starter operation, where manual pulling of the starter cord drives the engine to ignite.

Versatile Functionality: Leveraging its power output and compatible attachments, it can perform over 40 field operations including trenching, ridge formation, hilling, rotary tilling, weeding, and fertilizing, meeting diverse agricultural production needs.

User-Friendly Operation: Most tiller gasoline engines feature handlebar clutches and throttle cable speed control. Ergonomically designed control levers allow operators to manage clutch engagement and speed adjustment with simple handlebar movements. Additionally, some models incorporate differential steering systems, enabling directional changes via a rotary knob-significantly reducing operational complexity.

product-556-556
product-800-800
product-650-650

 

Products parameter

 

 

Tiller Gasoline Engine
Model BoreStroke(mm) Displacement(cc) Engine Speed(rpm) Rated AC Output (kw) Fuel Tank Capacity(L) Engine Oil Capacity(L) Fuel Consumption(g/kw.h)
170F 70*54 208 3600 4 3.6 0.6 395
177F 77*58 270 3600 4.5 6.5 1 370
190F 90*66 420 3600 8.2 6.5 1.1 370
192F 92*66 440 3600 9 6.5 1.1 370
196F 96*86 622 3600 13 6.5 1.6 390
Our Entire Product Series Supports Customized Solutions. Parameters Can Be Optimized To Meet Your Specific Requirements

 

Product Details

 
1
Crankshaft load resistance
2
Pull-type starter engages instantly
3
Air filter prevents carbon buildup

Widely Applicable

 

 

Product compatibility covers a wide range of applications:

1. Agricultural machinery (micro tillers/sprayers/seeders/fertilizer spreaders/lawn mowers/brush cutters/threshing machines/combine harvesters) .etc

2. Non-agricultural equipment compatibility (small concrete vibrators/portable generators/landscape shredders/high-pressure washers/small air compressors/construction mud pumps/emergency drainage pumps). etc.

 

5WIDELY APPLICABLE

 

Why do We Choose Lomarch?

 

 

  • Dual-shaft diameter + quick-release interface, compatible with over 20 types of small and medium-sized equipment without modification.
  • Fuel consumption is 10%-12% lower than comparable horsepower engines, delivering over 5 hours of runtime on a full tank.
  • Accessories are universally compatible and readily available, with basic maintenance manageable by users themselves.
  • Fuel consumption is 10%-12% lower than comparable horsepower engines, with a full tank lasting over 5 hours.

 

5 why do we choose lomarch

 

FAQ

 

 

6 FAQ

 

Q: My tiller's gasoline engine is hard to pull-start at -5°C. Any solutions?

A: First pull the starter 3 times without fuel to expel cold air. Then close the choke and pull. After starting, open the choke.

Q: Are the spark plugs for a tiller gasoline engine interchangeable with those for a 168F? Can I use the wrong one if purchased by mistake?

A: They are interchangeable. Both use the A7TC model. If purchased by mistake, the same model can be used without issue.

Q: My tiller's gasoline engine makes unusual noises during operation. What could be causing this?

A: Possible causes include loose fan screws or insufficient bearing lubrication. First, shut down the engine and check external screws, then inspect the bearings.

 

1

Hot Tags: tiller gasoline engine, China tiller gasoline engine manufacturers, suppliers, factory, 192F Gasoline Engine, gasoline engine, Portable Agricultural Gasoline Engine, power engine, Single Cylinder Gasoline Engine, Tiller Gasoline Engine

Send Inquiry

whatsapp

Phone

E-mail

Inquiry