Welding Set Generator
video

Welding Set Generator

Welding set generator are specialized equipment designed to power welding operations or integrate “power generation + welding” functions. They address scenarios requiring stable power in outdoor locations without grid access or at fixed sites, serving as critical equipment for industrial welding, outdoor emergency repairs, and similar applications.
Send Inquiry
Product Introduction

Welding set generator are specialized equipment designed to power welding operations or integrate "power generation + welding" functions. They address scenarios requiring stable power in outdoor locations without grid access or at fixed sites, serving as critical equipment for industrial welding, outdoor emergency repairs, and similar applications.

product-676-676
product-587-587
product-587-587

Specification

 

 

Welding Set Generator
Model 10000-CE 11500-CE
Frequency(Hz) 50 50
Voltage(V) 230/400 230/400
Rated Power(kW) 7 8
Maximum Power(kW) 8 8.5
Power Factor Single-Phase 1.0/Three-Phase 0.8 Single-Phase 1.0/Three-Phase 0.8
Number Of Phases Smart Dual Pressure Smart Dual Pressure
Fuel Consumption Rate(g/kwh) <275 <275
Fuel tank Capacity(L) 22 22
Operating Time(h) 8 8
Noise At 7m(dB) 85 85
Use electrode diameter(mm) 1.6-5.0 1.6-5.0
Welding current(A) 20-200 20-200
Current Regulation Method Manual Rotation Adjustment
Insulation Class F F
Starting Method Manual/Electric Manual/Electric
Fuel Type Diesel Diesel
Power Model 192F 195F
Power Type Single Cylinder, Vertical,Four-Stroke, Air-Cooled
Our Entire Product Series Supports Customized Solutions. Parameters Can Be Optimized To Meet Your Specific Requirements

 

Product Details

 

 

1 Product details

1,The oil-water separator features a large-capacity sedimentation chamber design, increasing impurity holding capacity by 50% and reducing the frequency of waste discharge.

2 product details

2,Adding anti-aging additives to the oil pipe extends its service life to over 8,000 hours.

3 product details

3,The air filter utilizes high-density composite media, increasing dust-holding capacity by 30%. Together, these three factors extend generator maintenance intervals by 40%.

 

Widely Applicable

 

 

Diesel generators provide continuous power for outdoor construction projects and field exploration, while gasoline generators suit temporary power needs for camping and outdoor live streaming. Diesel water pumps handle drainage at outdoor sites and water supply in remote areas, whereas gasoline water pumps are ideal for outdoor cleaning and temporary water collection. Diesel engines power heavy-duty outdoor machinery, while gasoline engines drive portable tools. Diesel micro-tillers cultivate outdoor wastelands, and gasoline micro-tillers maintain small outdoor vegetable plots.

 

4WIDELY APPLICABLE

 

Why do We Choose Lomarch?

 

 

1

Integrated Design: Generator and welder combined into one unit, eliminating extra wiring for immediate use out of the box and reducing labor during single-lift transportation;

2

Rapid Current Response: Stabilizes sudden current changes from 100-300A within 0.3 seconds, preventing arc breaks and weld defects;

3

Special Welding Rod Compatibility: Optimized current waveform and polarity precisely control the molten pool, minimizing porosity and cracks;

4

Intelligent Alerts: Digital display shows real-time oil pressure, water temperature, etc. Audible and visual alarms prevent failures during abnormalities;

5

Low Consumption & Energy Saving: Conversion efficiency 8%-12% higher than standard units. Idle power consumption reduced by 15% for fuel savings.

 

 

5 why do we choose lomarch

 

FAQ

 

 

6 FAQ

 

Q: When welding thin steel plates under 1mm with a welding set generator, the material tends to burn through easily. What should be done?

A: Switch to "Thin Plate Mode",set the current to 50-80A, use electrodes under 2.0mm, accelerate electrode movement, and if necessary, place thin copper sheets underneath for heat dissipation.

Q: Does prolonged low-load operation (below 50%) affect generator lifespan?

A: Yes. It promotes carbon buildup and oil dilution. We recommend running at full load for 30 minutes monthly to clear carbon deposits and protect components.

Q: Should I add protection if welding sparks hit the unit's casing?

A: Recommended. Apply fire-resistant cloth rated for 500°C+ to prevent paint damage or electrical fires. Essential during overhead or vertical welding.

 

product-970-2129

Hot Tags: welding set generator, China welding set generator manufacturers, suppliers, factory, Diesel Generator for Welding Machine, diesel welding generator, Genset Diesel Welder Generator, Portable Diesel Welder Generator, Welder Generator Combo Diesel, Welding Set Generator

Send Inquiry

whatsapp

Phone

E-mail

Inquiry